Heat-Fixing Unit And Fu Lamp - Brother 1920CN - Color Inkjet - Fax Service Manual

1.18 Heat-fixing Unit and FU Lamp

(1) Remove the screw from the harness duct. The chassis grounding wire also comes off.
(2) Peel off tape and take off the main-relay (motors) harness, main-relay (CCD) harness, and VC
harness* from the harness duct.
(3) Unhook the harness duct from the main chassis in the directions of arrows • and ‚.
*Provided on models supporting video capture
IV - 37