Brother 1920CN - Color Inkjet - Fax Service Manual page 135

Selector
No.
1 Not used.
Time length from transmission of
2
the last dial digit to CML ON
Time length from CML ON to CNG
3
transmission
Time length from CML ON to CED
4 transmission (except for facsimile-
to-telephone switching)
5
No. of training retries
6
7
Encoding system
(Compression)
8
Selector 2: Time length from transmission of the last dial digit to CML ON
l
This selector sets the time length from when the machine transmits the last dial digit until the CML
relay comes on.
Selector 3: Time length from CML ON to CNG transmission
l
This selector sets the time length until the machine transmits a CNG after it turns on the CML
relay.
Selector 4: Time length from CML ON to CED transmission
l
This selector sets the time length until the machine transmits a CED after it turns on the CML
relay. This setting does not apply to switching between facsimile and telephone.
Selectors 5 and 6: No. of training retries
l
These selectors set the number of training retries to be repeated before automatic fallback.
Selectors 7 and 8: Encoding system (Compression)
l l
This selector determines whether or not use of the MR/MMR coding system will be allowed.
WSW10
(Protocol definition 2)
Function
MR
MMR
V - 23
Setting and Specifications
0: 100 ms
0: 2 sec.
0: 0.5 sec.
No. 5 6
0 0 : 1 time
0 1 : 2 times
1 0 : 3 times
1 1 : 4 times
0: Allowed
0: Allowed
1: 50 ms
1: 4 sec.
1: 2 sec.
1: Not allowed
1: Not allowed