About This Document; Intended Audience; Related Documentation - HP 158222-B21 - StorageWorks Fibre Channel SAN Switch 8 Installation Instructions Manual

About this Document

This document describes the installation of the SAN Switch 2/32, SAN Switch
2/16, and SAN Switch 2/8 in an HP Series 9000 or comparable EIA rack, or in an
HP System/e rack using the SAN Switch Rack Mount Kit, part number
331148-B21.
This section describes the content reflected in this document, including:

Intended Audience

This book is intended for use by system administrators who are experienced with
the following:

Related Documentation

For a list of related documents included with this product, see the Related
Documents section of the Release Notes that came with your switch.
For the latest information, documentation, and firmware releases, please visit the
following StorageWorks website:
prodserv/storage.html.
For information about Fibre Channel standards, visit the Fibre Channel
Association website, located at: http://www.fibrechannel.org.
SAN Switch Rack Mount Kit Installation Instructions
Intended Audience, page 3
Related Documentation, page 3
Rack Stability, page 4
Installation and Safety
Installing the Switch in a Rack Using the SAN Switch Rack Mount
page 8
HP StorageWorks Fibre Channel SAN switches
Fabric Operating System (FOS) V3.1.x or later
Guidelines, page 5
http://www.hp.com/country/us/eng/
Kit,
3