HP 158222-B21 - StorageWorks Fibre Channel SAN Switch 8 Installation Instructions Manual page 18

7. Insert the switch with the attached inner rails into the outer rails.
Note:
comparable EIA rack.
Figure 9: Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
18
This step applies to both the HP System/e rack and the HP 9000 Series or
Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers with one on each side. See
Figure 9 and Figure 10.
SAN Switch Rack Mount Kit Installation Instructions