HP 158222-B21 - StorageWorks Fibre Channel SAN Switch 8 Installation Instructions Manual page 16

Note:
rails. Each switch requires a different number of these screws. For example,
shows the an inner rail being attached to the SAN Switch 2/16 with five screws.
Attaching both inner rails requires ten screws.
Figure 7: Assembling the inner rails
Note:
screw with thread lock and torque between 6 to 8 inch-pounds.
16
a. Assemble the two inner rails (one on each side) to the switch using the
appropriate number (from
screws as shown in
The rail kit provides fourteen #8-32 x 3/16-inch screws for assembling the inner
For factory integration only, tighten the #8-32 x 3/16-inch Phillips pan-head
step 5) of #8-32 x 3/16-inch Phillips pan-head
Figure 7.
SAN Switch Rack Mount Kit Installation Instructions
Figure 7