Dell PowerConnect 2808 Getting Started Manual page 229

Would you like to enter the Setup Wizard you must answer this question
within 60 seconds)? Y/N [Y]Y
:
192.168.2.1/255.255.255.0
:
[Ctrl+Z]
1
The system is not setup for SNMP management by default.
SNMP
To manage the switch using SNMP (required for Dell Network Manager) you can:
SNMP
*Setup the initial SNMP version 2 account now.
*Return later and setup additional SNMP v1/v2 accounts.
v1/v2
For more information on setting up SNMP accounts please see the user
SNMP
documentation.
Would you like to setup the SNMP management interface now?
2
To setup the SNMP management account you must specify the management system
IP address and the "community string" or password that the particular
management system uses to access the switch. The wizard automatically assigns
the highest access level [Privilege Level 15] to this account.
SNMP
IP
You can use Dell Network Manager or CLI to change this setting and to add
additional management systems. For more information on adding management
systems see the user documentation.
Dell Network Manager
Y/N [Y]Y
[N]
[Y]
CLI
IP /
Dell Network Manager
SNMP
Y/N [Y]Y
[
60
2
SNMP
Y/N [Y]Y
15]
SNMP
227