Dell PowerConnect 2808 Getting Started Manual page 17

2 Attach the supplied standard AC power cable to the AC connector on the back panel of the device.
Figure 3-1. Connecting to PowerConnect 2800 Series Console Port
Figure 3-2. Attaching AC Power cable to device
3 Locate an AC power receptacle.
4 Deactivate the AC power receptacle.
5 Connect the device to the AC receptacle.
6 Activate the AC power receptacle.
7 After activating the AC power receptacle, confirm that the device is connected and operating correctly
by examining the LEDs on the front panel.
Starting and Configuring the Device
15