(
SNMP
*
SNMP
*
SNMP
[N]
2
[Y]
To setup the SNMP management account you must specify the management
system IP address and the "community string" or password that the
particular management system uses to access the switch. The wizard
automatically assigns the highest access level [Privilege Level 15]
to this account.
You can use Dell Network Manager or CLI to change this setting, and
to add additional management systems. For more information on adding
management systems, see the user documentation.
To add a management station:
Please enter the SNMP community string to be used:
[Dell_Network_Manager]
(
SNMP
Dell Network Manager
IP
向导步骤 2
Now we need to setup your initial privilege (Level 15) user account.
This account is used to login to the CLI, Telnet and Web interface.
You may setup other accounts and change privilege levels later.
For more information on setting up user accounts and changing
privilege levels,see the user documentation.
Dell Network Manager
2
SNMP v1/v2
SNMP
(Y/N)[Y] Y)
SNMP
(A.B.C.D)
SNMP
IP
CLI
[Dell_Network_Manager])
(0.0.0.0)
[
15]
[0.0.0.0]
183