Dell PowerConnect 2808 Getting Started Manual page 184

• SNMP
•
• IP
• IP
• IP
Welcome to Dell Easy Setup Wizard.
The Setup Wizard guides you through the initial switch configuration,
and gets you up and running as quickly as possible. You can skip the
setup wizard, and enter CLI mode to manually configure the switch. The
system will prompt you with a default answer; by pressing enter, you
accept the default. You must respond to the next question to run the
setup wizard within 60 seconds, otherwise the system will continue
with normal operation using the default system configuration.
Would you like to enter the setup wizard (you must answer this
question within 60 seconds)? (Y/N)[Y] Y
(
CLI
60
[Ctrl+Z]
向导步骤 1
The system is not setup for SNMP management by default.
To manage the switch using SNMP (required for Dell Network Manager)
you can:
*Setup the initial SNMP Version 2 account now
*Return later and setup additional SNMP v1/v2 accounts
For more information on setting up SNMP accounts, please see the user
documentation.
Would you like to setup the SNMP management interface now? (Y/N)[Y] Y
182
SNMP
Dell
60
IP
IP / (192.168.2.1/255.255.255.0)
Enter
(Y/N)[Y] Y)
Web