Dell PowerConnect 2808 Getting Started Manual page 207

PG(Y/N)[Y] YP
[Ctrl+Z]
마법사 1 단계
The system is not setup for SNMP management by default.
To manage the switch using SNMP (required for Dell Network Manager)
you can:
*Setup the initial SNMP Version 2 account now
*Return later and setup additional SNMP v1/v2 accounts
For more information on setting up SNMP accounts, please see the user
documentation.
Would you like to setup the SNMP management interface now? (Y/N)[Y] YG
O
Manager
SNMP
UGSNMP
[N] 2
[Y]
To setup the SNMP management account you must specify the management
system IP address and the "community string" or password that the
particular management system uses to access the switch. The wizard
automatically assigns the highest access level [Privilege Level 15]
to this account.
You can use Dell Network Manager or CLI to change this setting, and
to add additional management systems. For more information on adding
management systems, see the user documentation.
To add a management station:
Please enter the SNMP community string to be used:
[Dell_Network_Manager] (SNMP
UG
UG SG
UG
.
:
SNMP
PGSNMP
YG
f (Y/N)[Y] Y)
.
O
, IP /
.
Q
.
I
IP
]W
(192.168.2.1/255.255.255.0)
UGODellGNetwork
SNMPGv1/v2
UGSNMP
:
IG
‚ X\„
aGQ
205