Dell PowerConnect 2808 Getting Started Manual page 164

2
Now we need to setup your initial privilege (Level 15) user account.
This account is used to login to the CLI, Telnet and Web interface.
You may setup other accounts and change privilege levels later.
For more information on setting up user accounts and changing
privilege levels,see the user documentation.
To setup a user account:
Enter the user name<1-20>:[admin]
Please enter the user password:*****
Please reenter the user password:*****
(
3
Next, an IP address is setup.
The IP address is defined on the default VLAN,(VLAN #2). This is the
IP address you use to access the Telnet, Web interface, or SNMP
interface for the switch. To setup an IP address:
Please enter the IP address of the device (A.B.C.D):10.6.22.100
Please enter the IP subnet mask (A.B.C.D or nn):[255.255.255.224]
(
IP
SNMP
162
(
CLI Telnet Web
<1-20> [admin]
*****
*****)
IP
VLAN (VLAN #2)
IP
15)
IP Telnet Web