Dell PowerConnect 2808 Getting Started Manual page 186

To setup a user account:
Enter the user name<1-20>:[admin]
Please enter the user password:*****
Please reenter the user password:*****
(
<1-20> [admin]
向导步骤 3
Next, an IP address is setup.
The IP address is defined on the default VLAN,(VLAN #2). This is the
IP address you use to access the Telnet, Web interface, or SNMP
interface for the switch. To setup an IP address:
Please enter the IP address of the device (A.B.C.D):10.6.22.100
Please enter the IP subnet mask (A.B.C.D or nn):[255.255.255.224]
(
IP
SNMP
IP
向导步骤 4
Finally, setup the default gateway.
Please enter the IP address of the gateway from which this network is
reachable(e.g. 192.168.1.1).Default gateway (A.B.C.D):[10.6.22.97]
184
CLI Telnet
*****
*****)
IP
VLAN,(VLAN #2)
IP IP
IP (A.B.C.D) 10.6.22.100
A.B.C.D
15
Web
nn [255.255.255.224])
Telnet Web