Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - INSTALLATION GUIDE 09-22-2008 Installation Manual page 50

Adding an ES to a Cluster
To add an ES to a cluster:
Home window>>System configuration
1 Click add an enforcement server. The Add enforcement server window
appears:
Figure 3-18
2 Select the cluster name for this enforcement server from the Cluster drop-down list.
3 Enter the IP address of this enforcement server in the IP address text box.
4 The SSH user name must be for an account with sufficient privileges to install certificates.
Enter the user name in the SSH User name text box.
5 Enter the SSH password for the SSH username account on this enforcement server in the SSH
Password text box.
6 Re-enter the SSH password for the SSH username account on this enforcement server in the
Re-enter SSH Password text box.
50 Novell ZENworks Network Access Control Installation Guide
Add Enforcement Server Window