Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - INSTALLATION GUIDE 09-22-2008 Installation Manual page 49

4 Click Add an Enforcement cluster. The Add an Enforcement cluster
window appears, with the General menu option selected by default.
Add Enforcement Cluster Window
Figure 3-17
5 In the Add Enforcement cluster window, General area, enter a name for the cluster
in the Cluster name field.
6 On the NAC policy set drop-down list, select Default.
7 Before Novell ZENworks Network Access Control is fully functional, you must select the
operating parameters for each cluster; however, you do not have to do this now. When you are
ready to configure the clusters, refer to the "Adding a cluster" section in the Novell ZENworks
Network Access Control Users Guide.
8 Click ok to save the cluster and return to the System configuration window.
Installing Novell ZENworks Network Access Control 49