Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - INSTALLATION GUIDE 09-22-2008 Installation Manual page 45

7 If you use a proxy server, configure it as follows:
7a Select the Use a proxy server for Internet connections check box.
Connecting to the Internet is necessary for updating tests, validating license keys, and
sending support packages.
7b Enter the IP address of the server that will act as the proxy for Internet connections in the
Proxy server IP address text box.
7c Enter the port used for connecting to the proxy server in the Proxy server port text
box. For example, 8080.
7d If your proxy server is authenticated, select the Proxy server is
authenticated check box and enter the following:
1. Select the scheme used to authenticate credentials on the proxy server from the
Authentication method drop-down list. The following methods are supported:
Basic — The original and most compatible authentication scheme for HTTP. It is
also the least secure because it sends the user ID and password to the server
unencrypted.
Digest — Added in the HTTP 1.1 protocol, this scheme is significantly more secure
than basic authentication because it never transfers the actual password across the
network, but instead uses it to encrypt a nonce value sent from the server.
Negotiable — Using this scheme, the client and the proxy server negotiate a scheme
for authentication. Ultimately, either the basic or digest scheme will be used.
2. Enter the ID of a user account on the proxy server in the User name text box.
3. Enter the password of the user account having the ID specified in User ID in the
Password text box.
4. To help confirm accuracy, type the same password you entered into the Password
text box in the Re-enter password text box.
8 Click Next. The Enter license key window appears.
Enter License Key Window
Figure 3-13
9 On the Enter license key window, in the License key field copy and paste your
Novell ZENworks Network Access Control license key, which was emailed to you as a text
file. Click Next. The Create administrator account window appears.
NOTE: An internet connection is required to register/activate the license. The license key is
registered to the server once the activation is complete and cannot be moved to another
machine without first contacting Novell Support (http://www.novell.com/support).
Installing Novell ZENworks Network Access Control 45