Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - INSTALLATION GUIDE 09-22-2008 Installation Manual page 44

4 Accept the license agreement:
4a If you do not wish to accept the license agreement, click I do not accept this
license agreement, or
4b Read the Novell ZENworks Network Access Control End-User License Agreement
(EULA) and select I Accept this license agreement.
4c Click Next. The Enter management server settings window appears.
Figure 3-12
5 The Date and time area is prepopulated with values entered during the initial installation
process. Change any of the following if necessary:
Region — Select a region from the drop-down list.
Time zone — Select a time zone from the drop-down list.
NTP servers — Enter one or more Network Time Protocol (NTP) servers, separated by
commas. The NTP protocol allows Novell ZENworks Network Access Control to
synchronize its date and time with other endpoints on your network. For example,
time.nist.gov.
6 The Network settings area is prepopulated with values entered during the initial installation
process. Change any of the following if necessary:
Host name — Enter a Fully Qualified Domain Name (FQDN). For example,
crocus.mycompany.com.
DNS IP address — Enter one or more DNS resolver IP addresses, separated by commas,
semicolons, or spaces. For example, 10.0.16.100,10.0.1.1.
44 Novell ZENworks Network Access Control Installation Guide
Enter Management Server Settings Window