Upgrading From 2.2 To 2.2.1 - Novell PRIVILEGED USER MANAGER 2.2.1 - GETTING STARTED GUIDE 03-31-2010 Getting Started Manual

Upgrading from 2.2 to 2.2.1

5
The procedure for upgrading from one release to the next release is slightly different than applying
patches to an existing release.
1 Publish the 2.2.1 packages to the Package Manager.
There are multiple ways to accomplish this.
You can use the 2.2.1 CD and set up your Framework Manager machine to be a local
Package Manager. For instructions, see
page 20.
You can configure the Package Manager to use the Novel
Novell Customer Care account. For instructions, see
in the Novell Privileged User Manager 2.2.1 Administration
2 (Conditional) If you are using the Novell Update Server, add the packages you need:
2a Click Package Manager on the home page of the console, then click Add Packages.
2b Configure the Package Filter to display the packages you need.
Version: Select 2.2.
Platform: Select your platforms. Make sure you select Cross Platform, which displays
the console packages that run on all platforms.
Types: Select at least Console, Module, and Patch.
Components: Select all of them: Command Control, Framework, and Miscellaneous.
2c Select all the packages that are listed. Make sure you select the Framework Patch.
2d Click Next, then click Finish when the packages have been successfully downloaded.
2e To ensure that all packages are up-to-date, click Check for Updates.
2f Select any packages that are listed.
2g Click Next, then click Finish when the packages have been successfully downloaded.
3 To upgrade your Framework Manager:
3a Click Hosts on the home page of the console.
3b Select the host that is your Framework Manager, use the arrow to display the packages,
then select Packages.
3c Click Update Packages in the task pane.
The Framework Patch should be displayed. This package must be updated to 2.2.1 before
you can update any other packages. If this package does not display, return to
add the Framework Patch for your platform.
3d Select the package, then click Next.
3e When the package has installed, click Finish.
3f Click Update Packages in the task pane.
3g Select the listed packages, then click Next.
Section 3.4, "Setting Up a Package Manager," on
®
l Update Server through your
"Configuring the Package Manager
guide.
"
Step 2 and
Upgrading from 2.2 to 2.2.1
5
35