Stopping And Restarting The Framework; Aix; Hp-Ux; Linux - Novell PRIVILEGED USER MANAGER 2.2.1 - GETTING STARTED GUIDE 03-31-2010 Getting Started Manual

6 (Optional) To view available packages, log in to the Framework Manager, then click Package
Manager.
7 Delete the
framework

3.5 Stopping and Restarting the Framework

The Framework services and processes start automatically after installation and system reboot, so
there is normally no need to stop and restart them. If you need to stop and restart the services and
processes manually, follow the instructions below for your platform:
Section 3.5.1, "AIX," on page 21
Section 3.5.2, "HP-UX," on page 21
Section 3.5.3, "Linux," on page 21
Section 3.5.4, "Solaris," on page 22
Section 3.5.5, "Tru64," on page 23
Section 3.5.6, "Windows," on page 23

3.5.1 AIX

To stop the Framework process:
stopsrc -s npum
To start the Framework process:
startsrc -s npum

3.5.2 HP-UX

To stop the Framework process:
/sbin/init.d/npum stop
To start the Framework process:
/sbin/init.d/npum start
To check the status:
/sbin/init.d/npum status

3.5.3 Linux

The following instructions apply to all distributions.
To stop the Framework process:
/etc/init.d/npum stop
To start the Framework process:
/etc/init.d/npum start
directory.
Installing the Framework Manager 21