Hp-Ux Framework Manager Install; Linux Framework Manager Install - Novell PRIVILEGED USER MANAGER 2.2.1 - GETTING STARTED GUIDE 03-31-2010 Getting Started Manual

2 After the AIX installation package is uncompressed, use one of the following methods to
perform the installation.
The AIX smitty program.
The following command:
3 After installation is complete, check that the service is running by viewing the log file. The log
file is located in
used. If the manager installed correctly, services should be listening on 0.0.0.0:29120 and
0.0.0.0:443.
4 If you have been supplied with a license, log in to the Framework Console and install the
license.
For information, refer to
then Section 3.3, "Installing a Novell Privileged User Manager License," on page

3.1.2 HP-UX Framework Manager Install

The HP-UX installation package is compressed through gzip. In order to install the package, you
must unzip the package through gunzip.
By default, the installation program installs the software into
create a directory in the required part of the file system and create a symbolic link to
.
npum
To install the HP-UX manager:
1 Copy the installation package to a temporary location and use the following command to
extract the installation files:
gunzip <filename>
See the
privilegedusermanager22/readme/privilegedusermanager_readme.html)
filename.
2 After the HP-UX installation package is uncompressed, use the following command to install
the manager:
swinstall -s /<directory of .depot file>/<filename>.depot \*
3 After installation is complete, check that the service is running by viewing the log file. The log
file is located in
used. If the manager installed correctly, services should be listening on 0.0.0.0:29120 and
0.0.0.0:443.
4 If you have been supplied with a license, log in to the Framework Console and install the
license.
For information, refer to
then Section 3.3, "Installing a Novell Privileged User Manager License," on page

3.1.3 Linux Framework Manager Install

Linux hosts use the RPM packaging system for installation, upgrade, and removal.
16 Novell Privileged User Manager 2.2.1 Getting Started Guide
installp -acgNQqwX -d <directory of .bff file> novellnpum
/opt/novell/npum/logs/unifid.log
Section 3.2, "Accessing the Framework Console," on page
"Novell Privileged User Manager Readme" (http://www.novell.com/documentation/
/opt/novell/npum/logs/unifid.log,
Section 3.2, "Accessing the Framework Console," on page
, if the default install location was
. To change this,
/opt/novell/npum
/opt/novell/
for the actual
if the default install location was
19, and
20.
19, and
20.