Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual page 64

• Controlling system with working network connection and VNC viewer software
or Java-enabled browser (Firefox, Konqueror, Internet Explorer, or Opera)
• Physical boot medium (CD, DVD, or custom boot disk) for booting the target system
• Running DHCP server providing IP addresses
To perform this kind of installation, proceed as follows:
1 Set up the installation source as described in
2 Boot the target system using the first CD or DVD of the SUSE Linux Enterprise
3 When the boot screen of the target system appears, use the boot options prompt
4 On the controlling workstation, open a VNC viewing application or Web
5 Perform the installation as described in
6 Finish the installation.
46 Installation and Administration
Holding the Installation Sources"
network server. For an SMB installation source, refer to
an SMB Installation Source"
media kit.
to set the appropriate VNC options and the address of the installation source.
This is described in detail in
lation" (page 72).
The target system boots to a text-based environment, giving the network address
and display number under which the graphical installation environment can be
addressed by any VNC viewer application or browser. VNC installations announce
themselves over OpenSLP and can be found using Konqueror in service:/
or slp:/ mode.
browser and connect to the target system as described in
Installation" (page 77).
(page 17). Reconnect to the target system after it reboots for the final part of the
installation.
Section 4.2, "Setting Up the Server
(page 52). Choose an NFS, HTTP, or FTP
(page 60).
Section 4.4, "Booting the Target System for Instal-
Chapter 3, Installation with YaST
Section 4.2.5, "Managing
Section 4.5.1, "VNC