Yast In Text Mode - Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual

/proc/modules
This displays the individual modules.
/proc/mounts
This displays devices currently mounted.
/proc/partitions
This shows the partitioning of all hard disks.
/proc/version
This displays the current version of Linux.
/var/log/YaST2/y2log
This displays all YaST log messages.
/var/log/boot.msg
This displays information concerning the start-up of the system.
/var/log/faillog
This displays login failures.
/var/log/warn
This displays all system warnings.
8.11.8 Vendor Driver CD
Install device drivers from a Linux driver CD that contains drivers for SUSE Linux
Enterprise with Miscellaneous > Vendor Driver CD. When installing SUSE Linux En-
terprise from scratch, use this YaST module to load the required drivers from the vendor
CD after the installation.

8.12 YaST in Text Mode

This section is intended for system administrators and experts who do not run an X
server on their systems and depend on the text-based installation tool. It provides basic
information about starting and operating YaST in text mode.
System Configuration with YaST 179