Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007 Installation Manual page 965

51.7.4 Changing to the Mounted File System
For the zipl command to read the configuration file from the root device of the installed
system and not from the rescue system, change the root device to the installed system
with the chroot command:
Example 51.2 chroot to the Mounted File System
SuSE Instsys suse:/ # cd /mnt
SuSE Instsys suse:/mnt # chroot /mnt
51.7.5 Executing zipl
Now execute zipl to rewrite the IPL record with the correct values:
Example 51.3 Installing the IPL Record with zipl
sh-2.05b# zipl
building bootmap : /boot/zipl/bootmap
adding Kernel Image : /boot/kernel/image located at 0x00010000
adding Ramdisk : /boot/initrd located at 0x00800000
adding Parmline : /boot/zipl/parmfile located at 0x00001000
Bootloader for ECKD type devices with z/OS compatible layout installed.
Syncing disks....
...done
51.7.6 Exiting the Rescue System
To exit the rescue system, first leave the shell opened by the chroot command with
exit. To prevent any loss of data, flush all unwritten buffers to disk with the sync
command. Now change to the root directory of the rescue system and unmount the root
device of SUSE Linux Enterprise Server for IBM System z installation.
Example 51.4 Unmounting the File System
SuSE Instsys suse:/mnt # cd /
SuSE Instsys suse:/ # umount /mnt
Common Problems and Their Solutions 947