Novell LINUX ENTERPRISE SERVER 10 SP1 - ARCHITECTURE-SPECIFIC INFORMATION 15-03-2007 Supplementary Manual page 43

Figure 2.16 Working with the Configuration Status
Position to . . . . .
Type options, press Enter.
1=Vary on 2=Vary off
9=Display mode status
Opt Description
__ CINST
__ CURRY
1_ GINGER
__ PEPPER
__ PEPPERI
__ TEST
Parameters or command
===> ______________________
F3=Exit F4=Prompt
Watch the virtual console. linuxrc appears in the case of a network or VNC installation
and requests the user to make a few choices.
The IPL of the file ISERIES64 starts linuxrc in the case of a network installation. The
following steps are then necessary:
1. Select the desired language in linuxrc.
2. Select the Kernel Modules (Hardware Drivers) to load.
3. Select Load ppc_iseries modules and load the appropriate network module.
4. Select Back then Start Installation or System.
5. Select the installation source. Three options are available:
CD-ROM
This offers to install from an internal CD-ROM drive. Before the system ac-
cesses the CD-ROM, enter the network parameters for the installation over
VNC.
Work with Configuration Status
____ Starting characters
5=Work with job
13=Work with APPN status...
Status
VARIED OFF
ACTIVE
VARIED OFF
VARIED OFF
ACTIVE
VARIED OFF
F12=Cancel F23=More options
SUSE1
12/03/01 17:45:21
8=Work with description
----------Job-------------
F24=More keys
Bottom
Preparation 37