Novell LINUX ENTERPRISE SERVER 10 SP1 - ARCHITECTURE-SPECIFIC INFORMATION 15-03-2007 Supplementary Manual page 35

Figure 2.12 Creating a Network Server Description (CRTNWSD)
Type choices, press Enter.
Network server description . . .
Resource name . . . . . . . . .
Network server type
F3=Exit F4=Prompt
F24=More keys
Parameter NWSD required.
Change the following settings:
• NWSD name
• Network server type = *GUEST
• Partition = enter the partition name here
• Code page = 437
• IPL source = *STMF
• IPL stream file = '/QOPT/SLES100.001/SUSEBOOT/inst64'. SU90.001 is the
disk label of the boot CD. To find out the disk label, insert the CD and enter
DSPLNK QOPT at a command prompt. For Service Pack 2, for example, the pa-
rameter is /QOPT/SLES100SP2.001/SUSEBOOT/inst64.
The statements made in
(page 35) are valid for network-based installations.
• IPL parameters = 'vnc=1 vncpassword=suseinst'
Create Network Server Desc (CRTNWSD)
ginger__
*NONE___
. . . . . . *guest__
F5=Refresh F12=Cancel
Section 2.4.4, "Creating a Network Installation Source"
Name
Name, *NONE
*WINDOWSNT, *GUEST
Bottom
F13=How to use this dis
+
Preparation 29