Novell LINUX ENTERPRISE SERVER 10 SP1 - ARCHITECTURE-SPECIFIC INFORMATION 15-03-2007 Supplementary Manual page 14

Figure 2.1 HMC: Server Management—Properties
Procedure 2.1 Assigning a CD-ROM or DVD Drive to an LPAR
1 Open the HMC application and go to Server and Partition > Server Management.
2 From the available servers, expand the server and partition to install.
3 Right-click the profile to use for installation and select Properties—see
4 In the Logical Partition Profile Properties dialog, select the Physical I/O tab.
5 From Managed system I/O devices, select the Other Mass Storage Controller
The result should look like
8 Architecture-Specific Information
"HMC: Server Management—Properties"
from the bus where it is installed. To assign this DVD drive to the partition, click
Add as required.
Figure 2.2, "HMC: Managed System I/O Devices"
(page 8).
Figure 2.1,
(page 9).