Additional Steps - Novell LINUX ENTERPRISE SERVER 10 SP1 - ARCHITECTURE-SPECIFIC INFORMATION 15-03-2007 Supplementary Manual

mt
system>
The command target is then determined. To work, for example, with blade number 9,
enter env -T system:blade[9]. Connect with the console of the JS20/JS21
Blade over Serial over LAN (SOL) with the command console.
system> env -T system:blade[9]
OK
system:blade[9]> console
Starting the Installation
The SUSE Linux Enterprise Server boot loader starts after the system check has com-
pleted.
Config file read, 149 bytes
Welcome to SuSE Linux (SLES-9)!
Use "install"
Use "install32"
You can pass the option "noinitrd"
Example: install noinitrd root=/dev/sda4
Welcome to yaboot version 1.3.11.SuSE
Enter "help" to get some basic usage information
boot:
Select install from the menu and press Enter .
In the case of an installation over VNC, append the parameters vnc=1 and
vncpassword=password to the command line for the kernel (install).

Additional Steps

Proceed as described in Chapter 3, Installation with YaST (↑Installation and Adminis-
tration) to begin installing the software with linuxrc and YaST.
to boot the pSeries 64bit kernel
to boot the 32bit RS/6000 kernel
to skip the installer.
Preparation 21