Table of Contents
Advertisement
Driver Properties
A
This section provides information about the Driver Configuration and Global Configuration Values
properties for the WorkOrder driver. These are the only unique properties for drivers. All other
driver properties (Named Password, Engine Control Values, Log Level, and so forth) are common to
all drivers. Refer to
"Driver
Administration Guide
for information about the common properties.
The information is presented from the viewpoint of iManager. If a field is different in Designer, it is
marked with an
icon.
Section A.1, "Driver Configuration," on page 43
Section A.2, "Global Configuration Values," on page 47
A.1 Driver Configuration
In iManager:
1 Click
to display the Identity Manager Administration page.
2 Open the driver set that contains the driver whose properties you want to edit:
2a In the Administration list, click Identity Manager Overview.
2b If the driver set is not listed on the Driver Sets tab, use the Search In field to search for and
display the driver set.
2c Click the driver set to open the Driver Set Overview page.
3 Locate the WorkOrder driver icon, then click the upper right corner of the driver icon to display
the Actions menu.
4 Click Edit Properties to display the driver's properties page.
By default, the Driver Configuration page is displayed.
In Designer:
1 Open a project in the Modeler.
2 Right-click the driver icon or line, then select click Properties > Driver Configuration.
The Driver Configuration options are divided into the following sections:
Section A.1.1, "Driver Module," on page 44
Section A.1.2, "Driver Object Password (iManager Only)," on page 44
Section A.1.3, "Authentication," on page 44
Section A.1.4, "Startup Option," on page 45
Section A.1.5, "Driver Parameters," on page 46
Section A.1.6, "ECMAScript (Designer Only)," on page 47
Properties" in the
Identity Manager 3.6.1 Common Driver
A
Driver Properties
43
Advertisement
Table of Contents
Need help?
Do you have a question about the IDENTITY MANAGER 3.6.1 - WORKORDER DRIVER IMPLEMENTATION GUIDE 18-12-2009 and is the answer not in the manual?
Questions and answers