Doitnow Flag; Sendtopublisherflag - Novell IDENTITY MANAGER 3.6.1 - WORKORDER DRIVER IMPLEMENTATION GUIDE 18-12-2009 Implementation Manual

B.2.1 DoItNow Flag
When this flag is set to True, the Subscriber channel wakes up the Publisher channel by sending the
work order to the Publisher channel. This allows the Publisher channel to perform the work order
immediately instead of waiting for the next polling time or polling interval.
Use this flag when you want the work order completed immediately. You can set this flag to True
when you manually create a work order, or in an automated solution you can use policies to
determine whether the flag should be set.
B.2.2 SendToPublisherFlag
When this flag is set to True for a work order, the Subscriber channel sends the work order to the
Publisher channel and the Publisher channel writes the WorkOrder object to the WorkOrder
container specified in the configuration parameters.
This flag is usually set to False. However, if a work order is initiated by a policy in response to an
event in the Identity Vault, setting the flag to True enables the WorkOrder driver to create the
WorkOrder object and add it to the Identity Vault's work order container. The WorkOrder object can
then be processed like any other WorkOrder object added to the container by another driver.
50 Identity Manager 3.6.1 WorkOrder Driver Implementation Guide.