Publisher Channel - Novell IDENTITY MANAGER 3.6.1 - WORKORDER DRIVER IMPLEMENTATION GUIDE 18-12-2009 Implementation Manual

Rule or Policy
Create Rule
Placement Rule
Command Transformation
Schema Mapping
Output Transformation

6.1.2 Publisher Channel

The following table lists the rules and policies used to configure the Publisher channel:
Configuring the Publisher channel
Table 6-2
Rule or Policy
Schema Mapping
Event Transformation
Publisher Filter
Matching Rule
Placement Rule
Command Transformation
30 Identity Manager 3.6.1 WorkOrder Driver Implementation Guide.
What it does
Contains rules only for WorkOrder objects.
Requires values for the following attributes on a WorkOrder object:
nwoStatus
nwoSendToPublisher
nwoDoItNow
nwoContent
nwoType
If the values are not present, the work order is not sent to the
Publisher channel and the work order is not updated by the driver.
For a description of these attributes, see
Policy Rules For Work Order Management," on page
Maps work orders from the work order container you specified to the
driver. This mapping is necessary so that the Subscriber channel can
check the work orders to see if the DoItNow flag is set to True.
Not used in the sample configuration.
Maps the eDirectory namespace to the Work Order namespace.
Not used in the sample configuration.
What it does
Maps the Work Order driver namespace to the eDirectory namespace.
Not used in the sample configuration.
Allows only events for WorkOrder objects to be processed.
Not used in the sample configuration.
Places WorkOrder and WorkToDo objects in the correct container as
defined in the driver's configuration parameters.
Not used in the sample configuration.
Appendix C, "Schema and
51.