Driver Properties
A
This section provides information about the Driver Configuration and Global Configuration Values
properties for the Null Service driver and the Loopback Service driver. These are the only unique
properties for drivers. All other driver properties (Named Password, Engine Control Values, Log
Level, and so forth) are common to all drivers. Refer to
3.6.1 Common Driver Administration Guide
The properties information is presented from the viewpoint of iManager. If a field is different in
Designer, it is marked with a
Section A.1, "Driver Configuration," on page 27
Section A.2, "Global Configuration Values," on page 29
A.1 Driver Configuration
In iManager:
1 In iManager, click
2 Open the driver set that contains the driver whose properties you want to edit. To do so:
2a In the Administration list, click Identity Manager Overview.
2b If the driver set is not listed on the Driver Sets tab, use the Search In field to search for and
display the driver set.
2c Click the driver set to open the Driver Set Overview page.
3 Locate the driver icon, then click the upper right corner of the driver icon to display the Actions
menu.
4 Click Edit Properties to display the driver's properties page.
5 Click Driver Configuration.
In Designer:
1 Open a project in the Modeler.
2 Right-click the driver icon
The Driver Configuration options are divided into the following sections:
Section A.1.1, "Driver Module," on page 28
Section A.1.2, "Driver Object Password (iManager Only)," on page 28
Section A.1.3, "Authentication," on page 28
Section A.1.4, "Startup Option," on page 29
Section A.1.5, "Driver Parameters," on page 29
Section A.1.6, "ECMAScript (Designer Only)," on page 29
for information about the common properties.
icon.
to display the Identity Manager Administration page.
or line, then select click Properties > Driver Configuration.
"Driver
Properties" in the
A
Identity Manager
Driver Properties
27
Need help?
Do you have a question about the IDENTITY MANAGER 3.6.1 - NULL SERVICE AND LOOPBACK SERVICE DRIVERS and is the answer not in the manual?
Questions and answers