Novell IDENTITY MANAGER 3.6.1 - WORKORDER DRIVER IMPLEMENTATION GUIDE 18-12-2009 Implementation Manual page 23

Prompt
Remote Password
Define Security Equivalences
Exclude Administrative Roles
When you finish providing the information required by the wizard, a Summary page similar to
the following is displayed.
At this point, the driver is created from the basic configuration file. To ensure that the driver
works the way you want it to for your environment, you must review and modify (if necessary)
the driver's default configuration settings.
4 To modify the default configuration settings, click the linked driver name, then continue with
the next section, Configuring the Driver
Description
This applies only if the driver is running remotely.
Specify the Remote Loader's password (as defined on the
Remote Loader service). The Metadirectory engine (or Remote
Loader shim) requires this password to authenticate to the
Remote Loader
The driver requires rights to objects within the Identity Vault and
to the input and output directories on the server. The Admin user
object is most often used to supply these rights. However, you
might want to create a DriversUser (for example) and assign
security equivalence to that user. Whatever rights that the driver
needs to have on the server, the DriversUser object must have
the same security rights.
You should exclude any administrative User objects (for
example, Admin and DriversUser) from synchronization.
Settings.
Creating a New Driver 23