Driver Module; A.1.1 Driver Module; Driver Object Password (Imanager Only); Authentication - Novell IDENTITY MANAGER 3.6.1 - WORKORDER DRIVER IMPLEMENTATION GUIDE 18-12-2009 Implementation Manual

A.1.1 Driver Module

The driver module changes the driver from running locally to running remotely or the reverse.
Driver Modules
Table A-1
Option
Java
Connect to Remote Loader
A.1.2 Driver Object Password (iManager Only)
Driver Object Password
Table A-2
Option
Driver Object Password

A.1.3 Authentication

The authentication section stores the information required to authenticate to the connected system.
44 Identity Manager 3.6.1 WorkOrder Driver Implementation Guide.
Description
Used to specify the name of the Java* class that is
instantiated for the shim component of the driver.
This class can be located in the
as a class file, or in the lib
file. If this option is selected, the driver is running
locally.
The name of the Java class is:
com.novell.nds.dirxml.driver.workorde
r.WorkOrderDriverShim
Used when the driver is connecting remotely to the
connected system. Designer includes two
suboptions:
Driver Object Password: Specifies a
password for the Driver object. If you are
using the Remote Loader, you must enter a
password on this page. Otherwise, the remote
driver does not run. The Remote Loader uses
this password to authenticate itself to the
remote driver shim.
Remote Loader Client Configuration for
Documentation: Includes information on the
Remote Loader client configuration when
Designer generates documentation for the
driver.
Description
Use this option to set a password for the driver
object. If you are using the Remote Loader, you
must enter a password on this page or the remote
driver does not run. This password is used by the
Remote Loader to authenticate itself to the remote
driver shim.
classes directory
directory as a .jar