Performing Queue Maintenance - Novell GROUPWISE 7 ASYNC GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Novell Confidential
LABEL5:
LABEL6:
LABEL7:

Performing Queue Maintenance

Queue maintenance lets you maintain information about your Async Gateway site that other
Async Gateways and GroupWise Windows clients need to connect to your Async Gateway.
1
2
3
4
PAUSE 1
SEND "athz\r"# Hang up
PAUSE 1
LOG "Dialing 555-1414."
SEND "atdt 555-1414\r"# Dial alternate number
LISTEN FOR 30
IF "CONNECT" GOTO LABEL2
IF TIMEOUT GOTO LABEL4
ENDLISTEN
DONE "Aborting Script to Answer Inbound call."
DONE "The Line is BUSY. Aborting script."
DONE "Unable to Dial"
®
In ConsoleOne , browse to and select the Domain object where you created the Async
Gateway to open the container.
Right-click the Async Gateway, then click Properties.
Click Queue Maintenance.
Select any of the following to perform the maintenance of your choice.
Check Database: Runs a check on the gateway database for physical errors, data integrity and
valid indexes. If the check is successful, Validate Directories is enabled.
Rebuild Database: Runs a rebuild function on the Async database. Use this function if the
Check Database function is unsuccessful.
Validate Directories: Matches the gateway's connection ID directories with the Async
database directory structure. If there is no match, the utility deletes the directories for any
Manual (ENU) 21 December 2004
Optimizing the Async Gateway
93