Optional Nlm Programs; Memory Requirements On Netware - Novell GROUPWISE 7 ASYNC GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Hide thumbs Also See for GROUPWISE 7 ASYNC GATEWAY - INSTALLATION AND ADMINISTRATION:
Table of Contents

Advertisement

Novell Confidential
NLM Name
aio.nlm
clib.nlm
gwenn3.nlm
nwsnut.nlm

Optional NLM Programs

The following NLM programs might be required to run the NetWare Async Gateway, depending
on the hardware configuration of your system. The table below lists some of the most common
port driver NLM programs you have the option of loading. There are many other AIO-compliant
NLM programs you can load according to the hardware you buy or other system needs. For a more
complete listing of AIO-compliant NLM programs, see
Drivers," on page
NLM Name
aiocomx.nlm
aiodgxi.nlm
aiodgxem.nlm

Memory Requirements on NetWare

The following table lists the memory requirements for various hardware and software components
of the NetWare Async Gateway. Analyze the components your server needs and then compare
them against the server's memory capabilities to determine if a memory upgrade is required.
Components
Basic one-port configuration (ngwasync.nlm)
Each additional port
gwenn3.nlm (Required)
aio.nlm (Required)
aiocomx.nlm
16
GroupWise 7 Async Gateway Installation and Administration Guide
Description
Asynchronous Input/Output (AIO) communication NLM. Should be present in
sys:\system as part of NetWare. Must be loaded as a link between NetWare and
other AIO device drivers that are configured as NLM programs.
C Language Runtime Library used for NetWare services. Should already be
present in sys:\system as part of NetWare.
GroupWise Agent Engine NLM. Might be present on your server if other
GroupWise components have already been installed. It is included with the Async
Gateway to ensure that it is in the sys:\system directory.
NetWare screens NLM. Should already be present in sys:\system as part of
NetWare.
101.
Description
The default communication port driver for use with your PC. Use if you intend
to use the existing communication ports (COM1, COM2) in your NetWare
server without adding a multiport expansion board.
The Digi* device driver for the DigiCHANNEL PC/Xi (16- port) multiport
expansion board.
The Digi device driver for the DigiCHANNEL PC/Xem (32-port) multiport
expansion board.
Manual (ENU) 21 December 2004
Appendix A, "Asynchronous Input/Output
Minimum Memory Requirement
510 KB
57 KB
6 MB
6 KB
17 KB

Advertisement

Table of Contents
loading

Table of Contents