Novell GROUPWISE 7 ASYNC GATEWAY - INSTALLATION AND ADMINISTRATION Installation And Administration Manual page 52

Novell Confidential
Access Control
The access.cfg file contains one access control statement. The statement is used to turn access
control on or off.
Syntax:
Example:
There should only be one access control statement in the file. If the file includes multiple
statements, the last statement is used.
Access Control Headers
The access control header specifies the group of users that the access control settings (keywords)
will apply to. In addition, the header specifies the direction (inbound or outbound) for which the
settings apply. There are three possible headers:
[Domain.po:direction]
[Default:direction]
[Accessgroup:name]
[Domain.po:direction]
The Domain.po header specifies the GroupWise post office to which you are applying the access
control settings. Only users in the specified post office are affected by the settings.
Direction determines in which direction the settings are valid. The two possible directions are In
and Out. In specifies messages coming into the GroupWise system through the Async Gateway
and Out specifies messages sent out from the GroupWise system through the Async Gateway. If
no direction is specified, Out is the default.
Syntax: [
Example: [
In the example, all settings under this header apply to users in the ACCOUNTING post office who
send mail to users on the other side of the Async Gateway.
[Default:direction]
The Default header specifies the default access control settings for GroupWise users who are not
covered by one of the other headers.
Direction determines in which direction the settings are valid. The two possible directions are In
and Out. In specifies messages coming in to the GroupWise system through the Async Gateway
and Out specifies messages sent out from the GroupWise system through the Async Gateway. If
no direction is specified, Out is the default.
Syntax:
Example:
In the example, all settings under this header apply to users who are receiving mail from Async
users and who are not covered by another header.
52
GroupWise 7 Async Gateway Installation and Administration Guide
access control = on |off
access control = on
domain.po:direction
corporate.accounting:out
[default:direction]
[default:in]
]
]
Manual (ENU) 21 December 2004