Advertisement
Quick Links
Page 1 of 25
LP0397
FITTING INSTRUCTIONS FOR LP0397 LICENCE PLATE BRACKET
This kit contains the items pictured and labelled over page.
Some parts may be shown for clarity of instructions only.
Do not proceed until you are sure all parts are present.
Please read all instructions before proceeding.
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
Please note that the way the kit is packed does not necessarily represent the way of
mounting to the bike.
In the event of rubber washers being used to hold components onto bolts,
these rubber washers can be thrown away.
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM
WWW.RG-RACING.COM
Racing Technique Ltd t/A R&G
Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ
Tel: +44 (0)1420 89007
www.rg-racing.com
Email:
infor@rg-racing.com
Advertisement
Related Manuals for R&G LP0397
Summary of Contents for R&G LP0397
- Page 1 Page 1 of 25 LP0397 FITTING INSTRUCTIONS FOR LP0397 LICENCE PLATE BRACKET This kit contains the items pictured and labelled over page. Some parts may be shown for clarity of instructions only. Do not proceed until you are sure all parts are present.
- Page 2 Page 2 of 25 LP0397 TOOLS REQUIRED GENERAL TORQUE SETTINGS Set of metric Hex keys to include M4 BOLT = 8Nm • 3mm, 4mm and 5mm. M5 BOLT = T30 Torx head tool • M6 BOLT = Set of metric sockets and wrench.
- Page 3 Page 3 of 25 LP0397 ASSEMBLY DIAGRAM 1 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 4 Page 4 of 25 LP0397 ASSEMBLY DIAGRAM 2 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 5 Page 5 of 25 LP0397 DIAGRAM 3 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 6 Page 6 of 25 LP0397 FITTING PICTURES PICTURE 2 PICTURE 1 PICTURE 3 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 7 Page 7 of 25 LP0397 FITTING INSTRUCTIONS Before fitting the R&G tail tidy you will need to remove some OEM parts. Below is a suggested list of parts to be removed. Rear seat • Rear side panels • • Under rear seat cover plate OEM number plate bracket •...
- Page 8 Page 8 of 25 LP0397 9. After mounting the tail tidy, the centre bolt (ITEM 7) with washer (ITEM 9) will need to be bolted through the mounting hole in the LICENCE PLATE SUPPORT (ITEM 2) as shown in DIAGRAM 1-2.
- Page 9 Page 9 of 25 LP0397 NOTICE DE MONTAGE LP0397 SUPPORT DE PLAQUE E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS E PAS PROCEDER AU MONTAGE TANT QUE VOUS N...
- Page 10 Page 10 of 25 LP0397 OUTILS REQUIS VALEURS DE SERRAGE M4 BOULON = 8Nm Clés hexagonales 3mm, 4mm et • 5mm. M5 BOULON = 12Nm Clé Torx T30 • M6 BOULON = 15Nm Clé à cliquet + douilles 6, 8 &...
- Page 11 Page 11 of 25 LP0397 SCHÉMA D’ENSEMBLE 1 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 12 Page 12 of 25 LP0397 SCHÉMA D’ENSEMBLE 2 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 13 Page 13 of 25 LP0397 SCHÉMA 3 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 14 Page 14 of 25 LP0397 PHOTOS DE MONTAGE PHOTO 2 PHOTO 1 PHOTO 3 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 15 Page 15 of 25 LP0397 NOTICE DE MONTAGE Avant de monter le support arrière R&G, vous devrez retirer certaines pièces d’origine. Vous trouverez ci-dessous une liste suggérée de pièces à retirer. Siège arrière • Panneaux latéraux arrière • • Sous la plaque de couverture du siège arrière Support de plaque d'immatriculation d’origine...
- Page 16 Page 16 of 25 LP0397 Une fois le support monté sur la moto, assurez-vous qu'il soit bien serré et sécurisé. 1. Après avoir monté le support arrière, le boulon central (ARTICLE 7) avec rondelle (ARTICLE 9) devra être boulonné à...
- Page 17 Page 17 of 25 LP0397 R&G RACING RETURNS POLICY (NON-FAULTY GOODS) Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-sellable condition, in the opinion of R&G Racing.
- Page 18 Page 18 of 25 LP0397 MONTAGEANLEITUNG FÜR LP0397 KENNZEICHENHALTER Alle Kit-Teile sind auf den nachfolgenden Seiten abgebildet und gekennzeichnet. Die abgebildeten Teile dienen lediglich zur Erklärung. Überprüfen Sie zuerst, dass alle Teile vorhanden sind. Lesen Sie die Montageanleitung komplett durch, bevor Sie anfangen.
- Page 19 Page 19 of 25 LP0397 SIE BENÖTIGEN FOLGENDES WERKZEUG: ALLGEM. ANZUGSDREHMOMENT • Satz Inbusschlüssel inkl. 3mm, M4 SCHRAUBE = 8Nm 4mm and 5mm. M5 SCHRAUBE = T30 Torx-Schlüssel • M6 SCHRAUBE = Satz Steckschlüssel inkl. 6, 8 & • M8 SCHRAUBE = 20Nm 10mm.
- Page 20 Page 20 of 25 LP0397 ZUSAMMENBAU ZEICHNUNG 1 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 21 Page 21 of 25 LP0397 ZUSAMMENBAU ZEICHNUNG 2 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 22 Page 22 of 25 LP0397 ZEICHNUNG 3 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 23 Page 23 of 25 LP0397 MONTAGE ABBILDUNGEN ABBILDUNG 2 ABBILDUNG 1 ABBILDUNG 3 Racing Technique Ltd t/A R&G Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU 34 3AQ Tel: +44 (0)1420 89007 www.rg-racing.com Email: infor@rg-racing.com...
- Page 24 Page 24 of 25 LP0397 MONTAGEANLEITUNG Bevor Sie den R&G Kennzeichenhalter montieren müssen einige Originalteile vom Motorrad entfernt werden. Nachstehend finden Sie eine Liste der Teile, die Sie abmontieren sollen: • Beifahrersitz Seitenverkleidungen hinten • Untere Abdeckung (Beifahrersitz) • Original Kennzeichenhalter •...
- Page 25 Page 25 of 25 LP0397 31. Nachdem der Kennzeichenhalter montiert ist, die mittlere Schraube (ARTIKEL 7) muss mit einer Unterlegscheibe (ARTIKEL 9) in die Montageöffnung der KENNZEICHENHALTER-STÜTZE (ARTIKEL 2) eingesetzt werde wie in den ZEICHNUNGEN 1-2 abgebildet. Der DISTANZHALTER (ARTIKEL 5) soll zwischen der Einbaustelle und (ARTIKEL 2) platziert sein.
Need help?
Do you have a question about the LP0397 and is the answer not in the manual?
Questions and answers