Setpoint On The Contractual Power - CARLO GAVAZZI POWERSOFT Instruction Manual

PowerSoft
When the variable to be controlled is selected, in the box on the right, the
details are shown. In this box it is possible to: choose the setpoint to be
activated (upper and/or lower); edit the activation and deactivation
setpoint; enable or not the hardware alarming.
The activation setpoint cannot be equal to the deactivation one, but they
are to differ at least by 2% of the activation one. In case of wrong selection,
the system automatically helps the user to set the right values.
If the same setpoint on the same variables are to be set in different
instruments, a copy/paste function is available. When the setting is done in
one instrument, its name is to be right clicked choosing copy. After
selecting the other instruments, right click on them to perform the paste
function.
5.4.1 S
This function is available only if the optional module PWS-Tariff is
available.
On the bottom of the window, it is possible to configure an alarm based on
the contractual powers (depending on the current tariff). The contractual
powers are to be set in the Tariff Management module (PWS-Tariff).
PowerSoft – Instruction manual
ETPOINT ON THE CONTRACTUAL POWER
47