Table of Contents
Advertisement
PowerSoft
active nor acknowledged are automatically deleted from this window and they are
stored in the event log.
To promptly inform the user of any new alarm or of the end of an alarm
situation, the Active alarm window automatically pops up when such a situation
occurs.
The following operations are possible:
Acknowledgement: using the two top right buttons it is
possible to acknowledge the selected alarm or all the alarms
at the same time. Only a logged-in user can acknowledge an
alarm.
Filtering: using the two top left buttons it is possible to filter
the alarms choosing to show/hide the setpoint alarm or the
communication errors.
Enabling the alarm bell and silencing it: it is possible to
enable the PC alarm bell in case of alarm. This signalling is
active until the user silences it with the relevant button.
The Active alarm window can be accessed double clicking on the status
bar, as shown in the picture:
PowerSoft – Instruction manual
20
Advertisement
Table of Contents
