Table of Contents
Advertisement
PowerSoft
- On regular basis. The mail can be sent once a day (selecting
- On event: it is possible to send a mail when a
In this case, the E-mail is not immediately sent, but only after a
delay of 1 minute, so to avoid a great number of E-mails if
the event is frequent (for example a setpoint with a low
hysteresis).
The following parameters are:
- A valid e-mail address, or a series of addresses separated by
- A subject for the mail
- The text of the mail
PowerSoft – Instruction manual
the desired hour), once a week, or once a month (selecting
the day and hour).
communication error or a setpoint alarm appears. These
events can be filtered applying the rule to all, some or only
one instrument.
the ";" character
72
Advertisement
Table of Contents
