Table of Contents
Advertisement
PowerSoft
relevant instrument. The values to be shown can be the real-time ones, or
the minimum, the maximum or the average from the last recording on the
hard disk. The availability of these different values is set in the
configuration of the instrument properties (Configurator), when the values
to be stored are decided.
The Show button changes the variable on the selected column, while Cancel
leaves the previously displayed values.
Once the variables are configured, the period of time to be analysed is to be
set. On the left the starting and ending time and dates can be set. Clicking
on the Modify period button changes the period displayed in the report.
5.2.2
P
To simplify the use of this module, a series of predefined reports are
available using the boxes in the top left square. For each instrument,
selectable in the upper box, a number of predefined combinations of
variables can be selected. The chosen variables of the instrument are
displayed with reference to the time period set in the relevant square.
PowerSoft – Instruction manual
REDEFINED TRENDS
38
Advertisement
Table of Contents
