Table of Contents
Advertisement
PowerSoft
5.10
A
UTOMATIC
This module allows the automatic sending of E-mails on regular basis or as
a consequence of selectable events. Its configuration is composed of two
parts, available only to the Administrators:
The configuration of the E-mail parameters
The configuration of the events and of the data to be sent
5.10.1
E-
The module windows are composed of two sections: the first one displays
the log of the events connected to the e-mailing; the second one includes
the form to configure the automatic e-mailing.
To send an E-mail the following parameters are required:
The SMTP server (the server for the outgoing mail)
The server "user ID" (if required)
The server "password" (if required)
An existing e-mail address
These parameters are the same used in the e-mail clients (Outlook, Eudora,
Thunderbird, etc.) and can be copied from their configuration parameters.
To check if the parameters are correctly set, a test e-mail can be sent.
PowerSoft – Instruction manual
E-
MAILING
MAIL PARAMETERS
(
PWS-
MAIL MODULE
)
70
Advertisement
Table of Contents
