EdgeStar KC3000SS Manual

Full size kegerator with digital display

Hide thumbs

page of 16

/ 16
Bookmarks

Quick Links

Download this manual

Read all of the instructions before using this appliance. When using

this appliance, always exercise basic safely precautions, including the

following:

 This appliance is designed for household use only and not for commercial

use. Do not use the appliance for uses other than that for which it is

designed.

 Do not use the appliance if the power supply cord is damaged. If the

power supply cord is damaged, it must be replaced by a qualified

technician.

 This unit is designed to function on 115 Volts/ 60 Hz (110/115/120 Volts

acceptable) electrical circuits.

 This appliance is not designed for children. Never allow unattended

children to use this appliance.

 Unplug the appliance if it will not be used for an extended period of time.

 Unplug the appliance prior to cleaning.

 Set the appliance on a level surface away from direct sunlight and other

heat sources.

 This appliance is designed to function optimally in room temperature

environments (mid 70°s Fahrenheit).

 Do not move the unit while it is full.

 The power supply cord must be grounded.

 Never pull the power supply cord directly to disconnect the appliance.

Always pull the plug out of the socket.

 Never lift the appliance by the power supply cord or the dispensing tap.

 Keep the power supply cord away from heating surfaces.

 Service only by authorized technicians.

 Do not immerse the appliance or its power supply cord in water or any

other liquid.

 Do not cover the appliance or place anything on it.

 Do not insert any objects into the ventilation holes.

 Only use approved CO

the procedures for the CO

 Cylinders contain pressurized CO

in a dry and cool place. CO

regulator! Failure to do so may cause an explosion resulting in possible

death or injury when the cylinder valve is opened.

 Do not dispose of empty CO

cylinder.

 Clean this appliance regularly, and after every keg.

 If you are replacing an older appliance with this unit, take care to remove

the door of the old appliance before throwing it away. This will alleviate the

risk of child entrapment.

SAFETY PRECAUTIONS

cylinders. Make sure you read and understand all

cylinders before installation.

cylinders should always be connected to a

cylinders in a fire. Never drop or throw a CO

. Keep them away from heat, and store

Need help?

Do you have a question about the KC3000SS and is the answer not in the manual?

Questions and answers

Summary of Contents for EdgeStar KC3000SS

Page 1 SAFETY PRECAUTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safely precautions, including the following:  This appliance is designed for household use only and not for commercial use. Do not use the appliance for uses other than that for which it is designed.
Page 2 Welcome and Thank You Welcome and thank you for purchasing this EdgeStar Draft Beer Dispenser. We are glad you choose us and we take pride in knowing that like our products our customer service will be just as dependable. Once you complete our easy unit set up by following the manual, it will provide you years of great service.
Page 3 TABLE OF CONTENTS ________________________________________________________________________ UNPACKING ACCESSORIES AND INVENTORY....4 Additional Accessories..........4 Proper Location............4 ASSEMBLY INSTRUCTIONS........Installing the Casters........... Installing the Beer Tap..........Installing the Guardrail..........Installing the CO Cylinder and CO Regulator......Installing the Keg Coupler-Tapping the Beer......OPERATING YOUR BEER DISPENSER......
Page 4 Suggested accessories include: A cleaning kit Different types of taps And more… For more information on compatible accessories, feel free to email service@edgestar.com or call toll-free 866-319-5473. Proper Location  To guarantee that your Draft Beer Dispenser will last for years to...
Page 5 ASSEMBLY INSTRUCTIONS Installing the Casters 1. With the contents inside the cabinet removed set the beer dispenser on its side. 2. Insert each caster into the holes on the bottom corners of the cabinet. Screw the casters in hand tight. 3.
Page 6 Connecting the CO Cylinder to the CO Regulator and Installing the CO Cylinder Holder Warning can be dangerous! CO cylinders contain high-pressured gas, which can be hazardous if handled improperly. Please handle with care. Note This section describes general CO and keg installation.
Page 7 Your beer dispenser comes with American Sankey Tap. Before purchasing a keg, check with your beer distributor to make sure that supplied American Sankey Tap can be used. Many European beers require a different tap. Please contact EdgeStar customer service online via email at service@edgestar.com or by telephone at 1-866-319-5473 for more information.
Page 8 OPERATING YOUR FRIDGE & BEER DISPENSER Grounding Instructions  This appliance’s plug must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electrical current. ...
Page 9 Setting the Regulator EdgeStar’s Draft Beer Dispenser comes with a single gauge CO gas regulator that has a 0-60 lb. pressure gauge showing the gas output pressure. Once the regulator is securely attached to the gas cylinder: 1. Close the shut-off valve on the regulator, and open the valve on the cylinder completely.
Page 10 Beer Clean Glasses We recommend that you reserve a set of glasses specifically to the enjoyment of your EdgeStar Draft Beer Dispenser. Do not wash beer glasses together with glasses that have contained milk or any other fatty substances. Using a glass for anything else may leave residues that are extremely hard to get rid of.
Page 11 Such thermometers are enclosed in a casing filled with liquid; this provides a constant accurate reading of the liquid (beer) temperature within the refrigerator. Contact EdgeStar customer service online via email at service@edgestar.com or by telephone at 1-866-319-5473 for more information.
Page 12 Understanding the Temperature Control Setting This kegerator has a cooling range of 32-50 °F (0-10 °C). Press the cooler or warmer buttons to adjust temperature by 1°. Press the F/C button to switch between Fahrenheit or Celsius. Press Deep Chill to activate the quick cooling feature of this kegerator. Press the button again to exit Deep Chill mode.
Page 13 A few minutes spent cleaning on a regular basis will add life to your system, and improve the quality of your draft beer! FOR INFORMATION ON PURCHASING CLEANING KITS PLEASE CONTACT EDGESTAR CUSTOMER SERVICE ONLINE VIA EMAIL AT service@edgestar.com...
Page 14 TROUBLESHOOTING THE BEER DISPENSER Problem Possible Causes What To Do Excess formation of foam Recent keg agitation If the keg has recently been “head.” Beer, when drawn is moved (transported), you all foam, or too much foam should let it stand of a and not enough liquid beer.
Page 15 See “Cleaning and Sputtering Draw Dispense system requires Maintenance” cleaning. Keg Coupler installed Check seal between keg & incorrectly faucet Line or dispenser obstructions. Verify that there are no obstructions in either the air line or dispenser line and that neither are frozen.
Page 16 All defective product components covered by this warranty will be repaired or replaced, at EdgeStar’s option, free of charge on a mail-in basis to EdgeStar’s authorized repair facility during the first 90 days from the date of original purchase. All defective product components covered by this warranty will be repaired or replaced, at EdgeStar’s option, on a mail-in basis to EdgeStar’s authorized repair facility...

This manual is also suitable for:

Kc3000sstwin