Sleepnet Veraseal 3 Quick Start Manual

NIV
Veraseal
®
Quick Start Guide
Available elbow options: Vented, Non-Vented, Non-Vented AAV
Sizes: (S,M,L,XL)
AIR°gel
Quick-Release
Non-Vent
1
2
3
www.sleepnetmasks.com | 5 Merrill Industrial Drive, Hampton, NH | 1-800-742-3646 | M90214 Version 0
Made in the USA of US and globally sourced components | Our products are backed by Sleepnet's warranty against manufacturing defects
3 Full Face Mask
AIR°gel Forehead Pad
+ Adjustment Dial
Oxygen Port
360° Rotating Elbow
ed
Unhook one or both straps and place the mask on the patient's
face. Seat the bottom cushion of the mask at the crease of the
chin. Tip the mask up to contact the nose, and rethread the
bottom strap/s through the slots.
Ensure the headgear is fully extended and lies flat across the back
of the head, with the headgear logo facing outward.
Position the upper and lower straps evenly on both sides of the
patient's head. Gradually tighten the headgear straps, starting
from the bottom and working your way up. Make sure the upper
and lower straps are parallel as shown. The mask should fit
comfortably snug, but not too tight. Check for any pressure
points or discomfort, and adjust as needed.
Vented Non-Vented AAV