Compaq 147092-001 - KVM Switch - PS/2 User Manual page 58

Field/Button Click to...
sort computers alphabetically by name
Names
sort computers by port number
Port
Sec enter the length of time a computer is
selected before the scan switches to the
next computer
return to default settings
Defaults
OK save changes and return to the previous
menu
Note: Highlighted port indicates selected device.
To set a custom scan pattern:
1. Type the name or port number of the computer in the Name and Port
boxes for the computer you want to include in the scan.
2. In the Sec column, type the number of seconds, from 1 to 255, that you
want this computer to be selected before switching to the next computer
in the sequence.
3. Repeat for each of the remaining computers to be included in the scan.
4. Click OK. The new scan pattern replaces the standard or previous
custom scan pattern.
To start the scan mode, select Scan Enabled from the Commands screen.
To cancel scan mode, deselect Scan Enabled from the Commands screen.
To remove a computer from the scan list:
1. Click on the computer you want to remove from the scan list.
2. Press Delete
or
Press Shift + Delete to delete the current computer and all computers
below it.
3. Click OK.
Table 4-11
Scan Screen Functions
Using the OSD 4-17
Alternate Method
Press Alt + N
Press Alt + P
Press Alt + S
Press Alt + D
Press Alt + O