Basic Settings Screen Fields And Buttons; Edit A Network Folder - NETGEAR DGN2200v1 User Manual

N300 Wireless ADSL2+ Modem Router DGN2200
Type \\readyshare in the address field of your Web browser.
•
Network/device name:
\\readyshare
Share name:
\\readyshare\USB_Storage
If you logged in to the modem router before you connected your USB device, you might not
see your USB device in the modem router screens until you log out and then log in again.

Basic Settings Screen Fields and Buttons

Network Device Name. The default is \\readyshare. This is the name used to access the
•
USB device connected to the modem router.
Folder Name. Full path of the used by the Network folder.
•
Volume Name. Volume name from the storage device (either USB drive or HDD).
•
Total/Free Space. Shows the current utilization of the storage device.
•
Share Name. You can click the name shown, or you can type it in the address field of
•
your Web browser.
If Not Shared is shown, then the default share has been deleted and no other share for
the root folder exists. Click the link to change this setting.
Read/Write Access. Shows the network folder permissions and access controls.
•
All no password allows all users to access the network folder.
-
admin uses the same password that you use to log in to the modem router main
-
menu.
Edit. You can click the Edit button to edit the Available Network folder settings. See
•
a Network Folder
Safely Remove USB Device. Click this button to safely remove the USB device attached
•
to your modem router. See

Edit a Network Folder

This process is the same from both the USB Storage (Basic Settings) and (Advanced
Settings) screens.
on page 65.
Unmount a USB Drive
on page 69.
Chapter 6. USB Storage
Edit
| 65