NETGEAR DGN2200v1 User Manual page 103

N300 Wireless ADSL2+ Modem Router DGN2200
Configure the security policy in the NETGEAR ProSafe VPN Client software:
3.
a. In the Network Security Policy list, expand the new connection by double-clicking its
name or clicking the + symbol. My Identity and Security Policy subheadings appear
below the connection name.
b. Click the Security Policy subheading to view the Security Policy settings.
Figure 20. Security Policy settings, Client-to-Gateway A
c. In the Select Phase 1 Negotiation Mode section of the screen, select the Main Mode
radio button.
Configure the VPN client identity.
4.
In this step, you provide information about the remote VPN client PC. You need to provide
the pre-shared key that you configured in the modem router and either a fixed IP address
or a fixed virtual IP address of the VPN client PC.
a. In the Network Security Policy list on the left side of the Security Policy Editor window,
click My Identity.
b. In the Select Certificate drop-down list, select None.
Chapter 8. Virtual Private Networking | 103