Lan Port (Local Ports); Modem; Wireless Port - NETGEAR DGN2200v1 User Manual

N300 wireless adsl2+ modem router
Hide thumbs Also See for DGN2200v1:
Table of Contents

Advertisement

N300 Wireless ADSL2+ Modem Router DGN2200

LAN Port (Local Ports)

MAC Address. The modem router LAN port Ethernet MAC address.
IP Address. The modem router LAN port IP address. The default is 192.168.0.1.
DHCP. If Off, the modem router does not assign IP addresses to PCs on the LAN. If On, the
modem router does assign IP addresses to PCs on the LAN.
IP Subnet Mask. The IP subnet mask used by the modem router LAN. The default is
255.255.255.0.

Modem

ADSL Firmware Version. The version of the firmware.
Modem Status. The connection status of the modem.
DownStream Connection Speed. The modem receives data from the DSL line at this
speed.
UpStream Connection Speed. The modem transmits data to the DSL line at this speed.
VPI. The Virtual Path Identifier setting.
VCI. The Virtual Channel Identifier setting.

Wireless Port

See
on page 33 for a more detailed description of these settings.
Wireless Settings Screen
Name (SSID). The Wi-Fi network name (service set ID) for the wireless network.
Region. The country where the unit is set up for use.
Channel. The current channel, which determines the operating frequency.
Mode. The current mbps setting.
Wireless AP. Indicates if the access point feature is enabled. If disabled, the Wireless LED
on the front panel is off.
Broadcast Name. Indicates if the modem router is configured to broadcast its SSID.
58 |
Chapter 5. Network Maintenance

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

N300Dgn2200

Table of Contents