NETGEAR DGN2200v1 User Manual page 124

Auto Policy Field
IKE
Parameters
Click Apply. The VPN Policies screen displays:
4.
Repeat these steps for the DGN2200 on LAN B. Pay special attention to the following
5.
network settings:
General, Remote Address Data (for example, 14.15.16.17)
•
Remote LAN, Start IP Address
•
IP Address (for example, 192.168.0.1)
-
Subnet Mask (for example, 255.255.255.0)
-
Pre-shared Key (for example, 12345678)
-
Use the VPN Status screen to activate the VPN tunnel:
6.
The VPN Status screen is only one of three ways to active a VPN
Note:
tunnel. See
about the other ways.
124 | Chapter 8. Virtual Private Networking
Direction
Exchange Mode
Diffie-Hellman (DH) Group
Local Identity Type
Remote Identity Type
Encryption Algorithm
Authentication Algorithm
Pre-shared Key
Activate a VPN Tunnel
N300 Wireless ADSL2+ Modem Router DGN2200
Description
Initiator and Responder
Main Mode
Group 2 (1024 Bit)
Use the default setting.
Use the default setting.
3DES
MD5
12345678
on page 112 for information