NETGEAR DGN2200v1 User Manual page 156

To check the VPN connection, you can initiate a request from the remote PC to the VPN
router's network by using the Connect option in the modem router screen:
Since the remote PC has a dynamically assigned WAN IP address, it has to initiate the
request.
a. Right-click the system tray icon to open the pop-up menu.
b. Select Connect to open the My Connections list.
c. Select toDGN2200.
The modem router reports the results of the attempt to connect. Once the connection is
established, you can access resources of the network connected to the VPN router.
To perform a ping test using this example, start from the remote PC:
a. Establish an Internet connection from the PC.
b. On the Windows taskbar, click the Start button, and then select Run.
c. Type ping -t 192.168.0.1, and then click OK.
156 | Appendix B. NETGEAR VPN Configuration
N300 Wireless ADSL2+ Modem Router DGN2200
Right-click the system
tray icon to open the
pop-up menu.
Right-click the system
tray icon to open the
pop-up menu.