Advertisement
Quick Links
NOVATEK-ELECTRO LLC
Intellectual industrial electronics
VOLTAGE AND PHASE
CONTROL RELAY
RN-35
NOVATEK-ELECTRO LLC. Company thanks you for purchasing our products.
You will be able to use properly the device after carefully studying the Operation Manual.
Store the Operation Manual throughout the service life of the device.
Odessa, Ukraine
OPERATION MANUAL
TECHNICAL PASSPORT
The quality management system of production complies with
the requirements of ISO 9001: 2008
Dear Customer,
www.novatek-electro.com
Advertisement
Related Manuals for Novatek-electro RN-35
Summary of Contents for Novatek-electro RN-35
- Page 1 ISO 9001: 2008 Dear Customer, NOVATEK-ELECTRO LLC. Company thanks you for purchasing our products. You will be able to use properly the device after carefully studying the Operation Manual. Store the Operation Manual throughout the service life of the device.
- Page 2 Electromagnetic compatibility; Industrial, scientific and medical RF equipment; Electromagnetic interference characteristics; Standards and measuring procedure (CISPR 11:2004); Electromagnetic compatibility; Part 4-2; Testing and measurement techniques; Electrostatic discharge immunity test (IEC 61000-4-2:2001). Harmful substances in amounts exceeding maximum permissible concentrations are not available. NOVATEK-ELECTRO RN-35...
- Page 3 1. APPLICATION 1.1. The Device Application RN-35 is the microprocessor-based device intended to protect three-phase consumers (e.g., engines and generators) against damage in case of improper full phase and non-symmetry of the mains voltage or phase sequence. Using the potentiometer you can set the limit values of the voltage.
- Page 4 3. THE DEVICE DESCRIPTION AND OPERATION 3.1. Design RN-35 is designed to be placed in a plastic housing for mounting on standard 35 mm DIN-rail, 1 module of S type. The housing is made of impact-resistant, self-extinguishing material. The housing design with overall and mounting dimensions is shown in Fig.
- Page 5 1. Disconnect power supply; 2. Connect the RN-35 in accordance with the diagram; 3. Check de-energizing of power wires using the appropriate device; 4. Install RN-35 in the switchboard on 35 mm rail; 5. Connect power supply; 6. Set threshold voltage (Fig. 1).
- Page 6 The device in the original package is permitted to be transported and stored at the temperature from minus 45 to +60 °C and relative humidity of no more than 80 %. 8. ACCEPTANCE CERTIFICATE RN-35 has been manufactured and accepted in accordance with the requirements of current technical documentation and classified as fit for operation. Seal...
Need help?
Do you have a question about the RN-35 and is the answer not in the manual?
Questions and answers